Mortise Door Lock with European Cylinder Hole - No. H22.1085.007

Technical drawing of Mortice Door Lock with European Cylinder Hole - No. SB2210/72

Mortise Door Lock with European Cylinder Hole - No. H22.1085.007

$115.00

SKU:: H22.1085.007

Shipping:: Calculated at Checkout

Reviews (0)

Finish *

Backset *

Current stock: 0

Quantity

Add to Wishlist

Description

PREMIUM QUALITY MORTISE ENTRY LOCK FOR SWINGING DOOR

Door lock No.H22.1085.007 will work only with a euro-profile-cylinder and requires a keyed cylinder or cylinder with a knob for locking and unlocking the door from the outside or inside.

Our mortise lock is far more secure than other locks that attach to the outside of a door frame.

A mortise lock needs a mortise, or a pocket, in the door frame to operate correctly. The bolt of the lock fits into the mortise.

Because special door preparation allows a longer and thicker mortise to slide into the pocket in the door itself, providing superior protection.

These types of locks require door preparation, so if your door isn't currently mortised to fit this kind of lock, you (or a professional installer) will need to use a mortise saw to cut into the door to fits door lock properly.

Take note that not all mortise locks have the same dimensions.
So before any door alteration, take careful measurements.

FEATURES:

LATCH-BOLT: Reversible without opening lock case (The latch bolt can be rotated by pushing it in and rotating along its axis)

FRONT PLATE: Brass Material, Square - 22 x 238mm

STRIKE PLATE: Two-sided/reversible, Striking plate with lip

LOCK CASE: Steel, powder coated - 15mm thick

DEADBOLT: Double-throw 19 mm , Brass Material.

CENTRE-TO-CENTRE: 85mm

BACKSET: Standard 60mm (2-3/8") or 70mm (2-3/4")

(Other backset 40mm, 45mm, 50mm, 80mm upon request minimum requred)

HUB SIZE: Square 8mm and Dimond Shape ( Baldwin Door Handle) For smaller spindle please buy reducer/spindle sleeve.

DOOR HANDED: NO - Door Lock Designed for right-handed and left-handed door

MILLING COVER: Included (Black Plastic)

SCREWS: Included

STANDARD FINISHINGS:

Polished Brass & Lacquer (Brass Material)
Satin Brass & Lacquer (Brass Material)
Polished Chrome Plated (Brass Material)
Satin Chrome Plated (Brass Material)
Satin Nickel Plated (Brass Material)
Bronzed Brass & Lacquer (Brass Material)
Antique Bronzed Brass & Lacquer (Brass Material)
Antique Bronzed Brass Matt & Lacquer (Brass Material)
Oil Rubbed Bronze (Brass Material)

(Other finishes upon request, minimum order required.)

ACCESSORIES:

Euro Cylinder Can Be Purchase Separate
Spindle reducer/spindle Sleeve Can Be Purchase Separate

MEASURE A MORTISE DOOR LOCK:

Backset – The distance from the front of the faceplate to the center of the spindle or to the centre of the euro hole cut out.
Centre-To-Centre – The distance from the centre of the spindle to the centre of the euro hole cut out.

ABOUT MORTISE LOCKS:

Lock Body – The housing for the bolt work, which are the components that will disengage and engage the lock.
Through Spindle – This long rod that connects the handles/knobs through the door and mortise lock body.
Euro-Profile-Cylinder – A cylinder that will secure through the door into the lock body, so that when a key is inserted the door will unlock. A mortise lock cylinder will have a cam, which is a rotating rectangular piece of metal that manipulates the handle’s ability to retract the latch.
Strike Plate – This metal fixture is fastened onto the doorway to line up with the latch bolt and potential deadbolt that reside in the lock body of the mortise.
Escutcheon Plates – Also known as rose plates, these fasten on either side of the door to create a sense of cohesion around the lock cylinder and handle
Faceplate – The faceplate covers the internal systems of the lock’s housing parallel to the strike plate, but on the door itself. Faceplate on mortise lock H22.1085.007 is pre fitted to the lock body some other vesions the face plate on a mortise lock will be separate.